3 Set up
■
11
3
Set up
3.1
Unpacking
The moisture analyser
comes in environmentally-friendly packaging,
specifically developed for this precision instrument, which provides
optimum protection for the instrument during transportation.
Follow instructions carefully when you unpack the moisture analyser
in order to avoid damaging it:
• Unpack the instrument carefully and gently. This is a precision
instrument.
• When temperatures outside are very low, the balance should first be
stored for a few hours in the unopened transport package in a dry
room at normal room temperature, so that no condensation settles
on the balance when it is unpacked.
• Check the moisture analyser for any external visible signs of
damage immediately after you unpack it. If you find that it has been
damaged in transit, notify your Precisa service agent immediately.
• If the moisture analyser is not being put into operation immediately
after purchase, store it in a dry place with minimal fluctuations in
temperature (see chapter 3.2.2 "Storage").
• Read these Operating Instructions carefully before operating the
balance, even if you have used Precisa equipment before and pay
particular attention to the safety instructions (see chapter 2 "Safety").
NOTE
Retain the original packaging in order to avoid the moisture analyser
becoming damaged in transit when it is shipped or transported and
to store the device under optimum conditions if it is out of operation
for an extended period.