prepASH Operating Instructions
Precisa
Ref01.i
19
6 Program
Selection
If you touch the
Open
icon, the program selection appears.
Select the desired program by touch. The chosen program will be highlighted in blue. The program is
opened by again touch the Open symbol.
prepASH is now ready to operate (see Ch. 8 Program Executionpage 23).
7 Program
Editor
The program editor is opened by tapping on
in the prepASH user interface.
Here you may adjust the temperature program. The temperature program consists of several program
steps in which the parameters may be defined.
7.1 Program
level
When you create a program, first of all select the program step in which the parameter settings are to
be active. A program supports up to 10 steps.
Switch from one step to another by touching the
Step
buttons. The program step
currently set is shown in the graphic in a red box.
During the program sequence, prepASH processes all the steps in order in which parameter settings
have been edited and then automatically switches to the cool-down step.
7.1.1 Parameter selection
Every section of the program contains, among other things, time and temperature settings, which are
defined via the parameter selection control fields.
The values can either be set by drawing lines in the diagram or by entering numerical values.
The
Number
Entry
window appears when you tap in the relevant number. Alternatively, the value can
be entered.
There is a sample program contained in section 8.6.6 Log, page 30.
