Precisa 490 IB Series, Operating Instructions Manual, Page: 29 / 46

9 Application ■
27
En
gl
is
h
9.7 Sum
With the aid of the „SUM” program, you can add individual weighings, without the balance being tared to
zero before each individual weighing.
Assignment of the function keys:
+ 3,4770
9
«
A
»
Store the stable weight applyed and add it to the sum of the
components; the balance is tared.
sto 1 res inf
+ 0,0000
9
«
A
»
Add further weights
sto 2 res inf
Retrieve the parameters:
+ 0,0000
9
«
D
»
Show the info display.
Display the total of the added components.
TOTAL 100.5790 9
+ 0,0000
9
«
D
» Display the remaining capacity.
res. Cap. 304.4210 9
+ 0,0000
9
«
D
» Display the individual components.
1= 3.4770 9
+ 0,0000
9
« esc »
Exit the info display.
sto 2 res inf
Clear the measurements:
+ 0,0000
9
«
C
»
Hold down the key until the acoustic signal sounds and the
component counter is reset.
sto 2 res inf
+ 0,0000
9
Measurements cleared, balance is ready for a new
measurement.
sto 0 res inf
A measurement log is printed by pressing the
« PRINT »
key.
• SETUP APPLICATION There is no Setup menu for this application!
SUM
Key Function
« STO i » Take stable value and add to the sum of the components
« WAIT i » Value not stabilized
« RES » Reset
« INF »
Change to display the total weight („TOTAL“), residual capacity („RES. CAP.“), indi-
vidual values and again back to the normal display.
Press « esc » to exit the INF display.
Display Key Step
+ 3,4770
9
«
F
» Press until „SUM“ appears.
sum
+ 3,4770
9
«
A
»
Store the stable value and add it to the sum of the
components.
sto 1 res inf
+ 8,58962
9
«
A
»
Add further weights.
sto 2 res inf
Display Key Step