Precisa 490 IB Series, Operating Instructions Manual, Page: 26 / 46

■ 9 Application
24
Working without Tare value:
Working with Tare value, manualy input by hand or interface, eg. 20.0000g:
9.3 Percent
With the aid of the „PERCENT” program you can display and print out the weight of different measurements
as a percentage of a previously defined reference weight.
Working without Tare value:
Working with Tare value, manualy input by hand or interface, here e.g. 20.0000g:
Display Key Step
+ 0,0000
9
«
F
»
Press until „COUNT“ appears.
Count
+ 12,1596
9
apply (or remove) e.g 25 pieces
5 10 25 50
+ 25
Pcs
«
C
»
The weight
is re
calculated in pieces (PCS) and displayed.
The reference quantity is set.
5 10 25 50
The quantity shown is printed by pressing the
« PRINT »
key.
Display Key Step
+ 10,0000
9
«
F
» Press until „COUNT“ appears.
Count
+ 10,0000
9
«
C
» 25 is flashing, the point of reference is measured
5 10 25 50
+ 35,0000
9
«
C
» apply (or remove) e.g 25 pieces
5 10 25 50
+ 35
Pcs
«
C
»
The weight is recalculated in pieces (PCS) and displayed.
The reference quantity is set.
5 10 25 50
The quantity shown is printed by pressing the
« PRINT »
key.
• SETUP APPLICATION
PERCENT DECIMALS AUTO
0
1
2
etc.
Enter number of decimal places.
The number of places that can be selected
after the decimal point depends on the
balance model.
Display Key Step
+ 13,4560
9
«
F
» Press until „PERCENT“ appears.
percent
+ 100,000
%
«
A
»
Place the reference weight on the balance to set the refer-
ence weight equal to 100%.
set
All subsequent measurements will now be shown as percentages of the reference weight so defined.
The percentage shown is printed by pressing the
« PRINT »
key.
Display Key Step
+ 10,0000
9
«
F
» Press until „PERCENT“ appears.
percent