Precisa 350-8182-000, Operating Instructions Manual

Page: 37 / 85

390 System Settings
Precisa Gravimetrics AG 36
NOTE
If a channel is not physically available, the transfer may take a long
time, because the scale only stops the transfer after a certain timeout.
NOTE
Further information on settings can be found in the context help.
6.2.1 Serial Port
For correct data transmission, a printer or other device must be connected to the DB9 connector on
the back of the balance and the usual parameters of the RS232 / V24 serial interface must be set
the same.
6.2.1.1 Protocol mode
The protocol defined for the application is output in the protocol mode. It is triggered automatically
or with the print button, as set in the active application. With the format setting, the width of the
log can be adjusted, e.g. on a printer with 40 or 24 characters.
6.2.1.2 Measurement transfer mode
In the measured value transfer mode, the current weight value is transferred at the push of a
button, if desired with a time stamp, device ID, net / gross / tare. For the definition of the format of
the measured value transmission, see 6.4 Measurement transfer.