Precidia ipocket232, User Manual

Page: 84 / 106

iPocket 232 User Guide Appendix B: Troubleshooting and Support
23-CML000293 iPocket232 Inc. B-6
ETHERNET – TRANSMIT lamp
Flashes when the iPocket 232 is sending or receiving data via the Ethernet port.
Normally you will see very short data bursts.
Table B.3: TRANSMIT Lamp Troubleshooting
Lamp Status Standard Troubleshooting Procedure
Flashing OK - data is
being
transmitted
None
Off
No data is
being
transmitted Ensure the Ethernet cable between the iPocket 232
and the Ethernet device is properly connected
SERIAL – TRANSMIT lamp
Illuminates when the iPocket 232 is sending or receiving data via the serial port Normally you
will see very short data bursts.
Table B.4: SERIAL TRANSMIT Lamp Troubleshooting
Lamp Status Standard Troubleshooting Practice
On OK - In
configuration
mode
Finish configuring the iPocket 232 and exit
from configuration mode.
Flashing OK - data is
being
transmitted
None
Off No data is
being
transmitted •
Ensure the serial cable between the
iPocket
232 and the serial device is properly
connected
•
Was the configuration recently changed?
Look at the System Status page to check the
system uptime. If it is a short period, check
the configuration of the unit to see if it has
been modified recently. Refer to Sections 3
and 4 for further information.