Precidia ipocket232, User Manual

Page: 57 / 106

6 System Settings iPocket 232 User Guide
23-CML000293 iPocket232 Inc. 51
6.4 Display System Status
The System Status page allows you to view useful statistics about the unit. This
information includes system uptime, activity through the serial port (Port #1), and
network port settings. The System Status page displays the same information as the
Status Web page.
You can easily determine the IP address of the unit through the System Status page, even
if it is dynamically allocated. The first Local address listed under Network Routing is the
IP address of the unit.
Choose
Display System Status
from the System Settings sub-menu.
The status information appears, an example of which is shown below.
iPocket232 Status:
System Uptime
Up 0 days, 0:13:48
Load Average: 5sec=17% 30sec=24% 5min=19% 30min=4%
Firmware Revision: 4.03.00 (2003-04-17)
Port #1 [null] (terminated/tcp-client, connected)
Received Transmitted
Bytes: 77461 Bytes: 10242
Packets: 158 Packets: 195
Avg-BpP: 490 Avg-BpP: 53
Network Routing
Local Network Subnet Mask Gateway Iface Pkts-In Pkts-Out Pkts-Err
192.168.1.18 192.168.1.0 255.255.255.0 eth 585 451 1
127.0.0.1 127.0.0.0 255.0.0.0 lo 0 0 0
Please hit <return>:
Example of the System Status Page
See Section 7.1, System Status for a description of the System Status page.
6.5 Dump System Log
Dump System Log allows you to review all activity that has occurred on the iPocket 232
since it was configured, or since the Delete System Log option was used. The dump may
require a few minutes to complete.
The System Log is a wrapping buffer up to 64 KB. It will never run out of memory, but
will write over the earlier messages once the buffer fills up. See Section 7.2, System Log
for a description of the log information.