Operation
53
Reloading nails
The magazine has a blank safety device.
This prevents you from being able to trigger the fastener driving tool
if there are only 5
–8 nails in the magazine.
▶
Load new nail strips (see page 40).
Setting down the fastener driving tool
The fastener driving tool has a specified resting position. The tool
has three padded areas on the right side for setting it down:
1
Padded area under the handle
2
Rear padded area
3
Tool tip padded area
▶
If work will be interrupted for a few minutes, set the fastener
driving tool down.
▶
Always set the fastener driving tool down so it is resting on the
three padded areas.
