Before operation
45
▶
Trigger the fastener driving tool.
▶
Check the following items:
−
Triggering occurs only when the triggering safety device is
pressed in, in other words when the tool tip is firmly pressed
against the wood.
−
For single triggering: The depressed triggering safety device and
the trigger button must always be moved back to the original
position to be triggered again.
−
For contact triggering: While the trigger button is depressed,
every time the tool tip is pressed onto the material within 5
seconds, a nail is driven into the piece of wood.
−
If the pause between contacts with the wood is more than
5 seconds, single triggering is set automatically.
▶
If the insertion depth is not correct, change the setting on the
adjusting wheel (see page 47).
▶
Run a test on a piece of wood again and check the insertion
depth.
✓
If all functions are performed correctly, you can use the
fastener driving tool.
