Operate stapler
24
Check function
To ensure proper operation of the stapler unit, proceed as follows:
ATTENTION
Observe the safety instructions in the chapter "Safety" on page
8.
Place the mouth opening on a sample cardboard material with the
thickness of the material to be processed.
Trigger the stapler device (see chapter "Drive in fasteners" on
page 31).
To do this, check the following properties:
-
At each triggering a fastener must be driven in the cardboard
material.
In order to obtain the desired bending image, change the staple
setting (6/7) (see page 31), the depth setting (3) (see page 25) or
the setting of staple length (9) (see page 26)
W
If necessary, repeat these steps.
The stapler unit is now ready for use.
Summary of Contents for KTVH-B19D
