Prebena 1GP-ALK35, Original Operating Instructions

Page: 61 / 232

After operation
23
After operation
After operation, or during long periods when the tool is not in use,
perform the steps described below.
Disconnecting the compressed air supply

Switch off the compressor.

Pull the quick coupler of the compressed air hose away from the
handle.
The quick coupler is now released.

Remove the compressed air hose from the connection on the
tacker.
The compressed air contained in the tacker escapes audibly.
Emptying the magazine

Open the magazine as described from page 17 onwards.

Remove the remaining fasteners.

Ensure that there are no single fasteners in the magazine and
shot channel.

Close the magazine as described from page 18 onwards.