Prebena 1GP-ALK35, Original Operating Instructions

Page: 57 / 232

Preparing the tacker
19
Checking the function
Proceed as follows to check the function of the tacker:
CAUTION

Note the danger warnings in the section on "Safety" from page
7 onwards.

Set the tool lug of the tacker on a piece of wood with a minimum
thickness of 40 mm.

Trigger the tacker (see the "Triggering tool" section on page 22).

Check the following properties:
-
Every time the tool is triggered, a fastener must be driven into
the piece of wood.
-
To achieve the desired driving depth, alter the operating
pressure of the compressor (see page 15).

Repeat these steps if necessary.
The tacker is now ready to use.