Prebena 1GP-ALK35, Original Operating Instructions

Page: 55 / 232

Preparing the tacker
17
WARNING
Risk of explosion if the maximum operating
pressure is exceeded.

In this case, immediately disconnect the compressed air
hose from the tacker.
Opening the magazine

To open the magazine (6), push the locking mechanism (4)
forwards in the direction of the arrow.

Pull out the lateral slider at the lock (5) towards the rear.
Inserting fasteners

To insert the fasteners (14) in the magazine, tilt the tacker to the
side and insert the strips into the magazine with the crown
upwards
(type: ALK) .

Make sure that the tip of the printed arrow (type: AL) on the
fastener is pointing downwards.

Push the fasteners as far as they will go to the left into the inlet.