manualshive.com logo in svg

PRASTEL GT+, Manual

Share
Download
PRASTEL GT+ Manual Download Page 15

GT+ 

ENGLISH 

ISGTPLUSEN_11_14.doc   

 

 

15 

 

 

 

transmitters contained in the archive into the memory of the UNIK card 
connected to the GT+. 
 

 
 
 

“FILES” Menu: 
 

This menu allows the receiver backups stored in the GT+ to be managed. 
“Read” Submenu: 

This submenu displays the transmitter codes contained in an archive. 
The user can move through all names of the archives stored in the GT+ 
memory using the up and down arrow buttons.  
The first line shows the archive name and the second line shows the 
type of original receiver followed by '-' and the number of transmitters 
stored in the archive. 
Once the archive has been selected by pressing OK, the list of all 
transmitters contained in the archive will be displayed. 
The up and down arrow buttons may be used to move through all the 
codes contained in the archive. 
The “Code” field refers to the transmitter number, “Ch” field refers to the 
channel number and “Pos” field refers to the row in the receiver 
memory. 
 

“Delete” Submenu: 

This submenu allows a GT+ memory archive to be deleted. 
 
The user can move through all names of the archives stored in the GT+ 
memory using the up and down arrow buttons.  
The first line shows the archive name and the second line shows the 
type of original receiver followed by '-' and the number of transmitters 
stored in the archive. 
Once the archive has been selected, pressing the OK button twice will 
delete the archive from the GT+ memory. 
 

“Format GT+" Submenu: 

This submenu allows all the archives saved in the GT+ memory to be 
deleted.  
Press the OK button to delete all the archives from the GT+ memory. 

 
 

 

 

 

 
 
 
 

 

 
 

 

 
 
 
 
 
 
 

 

 

“OPTIONS” Menu: 
 

This menu allows the GT+ parameters to be configured. 
 
“Language” Submenu: 

This submenu allows the language of the GT+ menus to be edited. 
Use the up and down arrow buttons to edit the language. The languages 
available are English, French and Italian. 
 

“LCD contrast” Submenu: 

This submenu allows the GT+ display contrast to be edited. Use the up 
and down arrow to edit the contrast level. 
 
 
 

“Buzzer” Submenu: 

This submenu allows the GT+ buzzer to be activated. 
Use the up and down arrow buttons to activate ("Yes") or deactivate 
("No") the buzzer. 
 
 
 

“Info” Submenu: 

This submenu displays the GT+ firmware release number and serial 
number. 

 

 

 

 
 

 

 

 

 

 

 

Buzzer 
>Info 

Buzzer: Yes 

>Buzzer 
Info 

Contraste LCD:5 

>

 

LCD contrast 

Buzzer 

>

 

Language 

LCD contrast 

FILES 
>

 

OPTIONS 

Delete 
>Format GT+ 

>Delete 
Format GT+ 

Code: 00001234 
Ch: 1 Pos: 0001 

ESSAI N1 
RX - 2 

>Read 
Delete 

>FILES 
OPTIONS 

Summary of Contents for GT+



















Reviews:

No comments

Brands by name

Popular brands

Load more brands