GSW
2.1
Identification of the
generator
The generator is identified by a special identification
plate (
1
), which is compliant with the requirements of
the Machinery Directive 2006/42/EC, affixed on the
metal frame.
WARNING
It is strictly prohibited to remove
the identification plate (1) from the
generator or to alter or delete the
data on the plate itself.
NOTE
The identification plate (1) is
designed to last. However, it is
recommended to take note of the
data on the plate in order to have
them stored. Contact the
manufacturer if the plate must be
replaced.
OPENSET
S
OUNDPROOF
The
“CE”
symbol (
2
) may not be present on the
plate. Refer to the following "Certification of the
generator" paragraph for further details.
The generator is uniquely identified according to the
model (
3
), the machine code (
4
), the serial number
(
5
) and the year of manufacture (
6
).
NOTE
The model data plate (3), machine
code (4), serial number (5) and year
of manufacture (6) may be asked for
if technical assistance is requested.
The plate also indicates the weight
(7) of the generator including the
circuit liquids (oil, coolant, etc.)
excluding the fuel. Consult this
information before proceeding with
the lifting operations.
2.2
Certification of the
generator
The generators marketed within the European
Community are accompanied by the relative CE
Declaration of Conformity, Annex IIA, of the EU
Directive 2006/42/EC. In this case, the identification
plate bears the
“CE”
symbol (see the “identification
of the generator” paragraph).
2.DESCRIPTION AND TECHNICAL DATA
63
Summary of Contents for GSW
Page 2: ...GSW 57 ...
Page 57: ...GSW 112 10 ROUTINE AND EXTRAORDINARY MAINTENANCE LOG ...
