GSW
NOTE
Do not pour fuel on the hot engine or
on other parts of the generator.
Remove fuel spills from painted
surfaces with a rag. Be careful not
to touch or hit hot parts of the
engine. Never use fuels that are old
or contaminated with other
elements (e.g. water or oil). Prevent
filth or water from entering the fuel
tank.
•
For the
“Automatic panel with standard
electronic board”
the fuel level indication can be
read on the screen of the electronic board itself.
Refer to the supplied manual of the standard
electronic board for details.
•
In the case of
“Manual panel with digital
board”
: check the fuel level inside the tank and
make sure that the reserve indicator LED on the
digital board is not on.
•
Switch the generator engine off (see the
"Stopping generator" paragraph).
•
When refuelling with an external pipe, top up the
fuel according to the relative type of refuelling
system (e.g. open the external tank valve, etc.).
•
The figures below show an example of windows
or holes for the pipes (
1
) to be passed towards the
external tank.
•
If NO piping for external refuelling is set up, open
the access doors to the engine (soundproof version),
then unscrew and remove the fuel filler cap (
2
).
When refuelling is finished, close the fuel filler cap
and the access doors to the engine (soundproof
version).
•
Do NOT fill the tank over the maximum level by
checking it on the specific page of the display of the
electronic board for
“Automatic panel with
standard electronic board”
or by inspecting it
visually in the case of
“Manual panel with digital
board”.
90
5.USE
Summary of Contents for GSW
Page 2: ...GSW 57 ...
Page 57: ...GSW 112 10 ROUTINE AND EXTRAORDINARY MAINTENANCE LOG ...
