background image

FURTHER INSTRUCTIONS FOR USE

 

Vessels containing liquids must not be placed on the charging station.

Avoid bending or running over the charging cable.

When the charging station is not in use, the charging cable must be coiled up on the device provided for this purpose

When not in use, fix the charging hitch in the charging hitch holder provided.

Before using the charging coupler, check it visually for damage or dirt on the contacts. 

The charging hitch must not be disconnected from the vehicle during the charging process. 

It is forbidden to insert objects into the charging coupler. 

Do not wash the vehicle with a garden hose or high-pressure cleaner when the charging hitch is plugged in, in order

 

to prevent water from entering the charging hitch or the vehicle's connecting device. 

The vehicle must be parked at a suitable distance from the charging station to ensure that the charging cable can be

 

plugged in without tension.

Avoid direct sunlight

Do not open an outdoor charging station during rain or snowfall.

The charging cable must not be connected to extension cables or adapter cables. 

Do not allow children to play unsupervised in the vicinity of the charging station.

The charging station must always be closed during operation.

The key to open the charging station should be kept in a place where unauthorised persons cannot access it.

For persons with a pacemaker or defibrillator, no statement can be made about the suitability of use, maintenance or

 

repair of the charging station, despite compliance with all European directives and standards on electromagnetic

 

compatibility. Please contact the manufacturer of the defibrillator or pacemaker for further information.

Improper use may result in serious injury or death, and may destroy the vehicle or the charging station.

Summary of Contents for ALPHA XT NRG1002















Reviews: