PR Lighting PR-8920, Manual

Page: 6 / 14

6/14
Press button FUNC, it will return to the upper menu one by one or browse through the main menu.
TO SET THE DMX START ADDRESS
Each device must be given a DMX start address so that the correct lighting fixture responds to the correct control signals. This DMX
start address is the channel number from which the lighting fixture starts to “listen” to the digital control information being sent out
from the controller. The device has 6 channels, so set the No. 1 lighting fixture’s address 001, No. 2 lighting fixture’s address 007,
No. 3 lighting fixture’s address 013, No. 4 lighting fixture’s address 019, and so on.
Launch the lighting fixture. Press button ENTER for more than 5 seconds to unlock the panel.
Press button FUNC, UP or DOWN to find “AddR” menu.
Then press ENTER to show DMX address and press UP or DOWN to set DMX address.
At this time, the address will flash continuously. Press button ENTER to confirm and it means the setting has been
enabled and saved. After powered next time, the latest setting will be used.
Press button FUNC, it will return to the upper menu one by one.