PR Lighting PR-8920, Manual

Page: 3 / 14

3/14
The lighting fixture can be only used indoors, IP20.
The lighting fixture is not designed or intended to be mounted directly on to inflammable surfaces.
The lighting fixture is only intended for installation, operation and maintenance by qualified personnel.
Do not project the beam onto inflammable surfaces, minimum distance is 5m.
5m
Avoid direct exposure to the light from the lamp. The light is harmful to eyes.
Do not attempt to dismantle and/or modify the lighting fixture in any way.
Electrical connection must only be carried out by qualified personnel.
Before installation, ensure that the voltage and frequency of power supply match the power requirements of the lighting fixture.
It is essential that each lighting fixture is correctly earthed and that electrical installation conforms to all relevant standards.
Do not connect this device to any other types of dimmer apparatus.
Make sure that the power-cord is never crimped or damaged by sharp edges. Never let the power-cord come into contact with other cables.
Only handle the power-cord by the plug. Never pull out the plug by tugging the power-cord.
When the lighting fixture is hanged to a high place, please use a safety cord provided to pass through the lighting fixture’s handles as a
secondary safety fixing for safety seasons. For details, refer to “INSTALL THE LIGHTING FIXTURE “section.
Exterior surface temperatures of the lighting fixture after 5 minutes operation is 45
℃
, when achieving steady state it is55
℃
.
There is no user serviceable parts inside the lighting fixture, do not open the housing and never operate the lighting fixture with the
covers removed.
If you have any questions, don’t hesitate to consult your dealer or manufacturer.
Always disconnection from power, when the device not in use or before cleaning or any maintenance
work !