10/20
REPLACING GOBOS
Rotating Gobo Wheel
Fixed Gobo Wheel
Disconnect the fixture from power. Carefully lift off the cover by undoing the 4 fast-fit screws.
Before the replacement of fixed gobos, take leaf spring out using finger, push the gobos out carefully and insert new gobos.
For rotating gobos: take rotating gobo wheel out by hand, push gobos out after pulling out leaf springs. Insert new gobos into gobo
holders, then insert leaf spring back and make sure it is in narrow ring groove in the holder, i.e. internal ring groove in the holder, then
flatten it. At last, use appropriate tool to push tightening spring back, then put the holder back into the wheel by another hand.
Note:
If the gobo is a glass one, it should be touched with glabrous, clean and soft tissue or cloth matted between hand and glass
instead of with bare hand.
Close the rear cover and fasten 4 fast-fit screws.
