PR Lighting Mega Colour 2500, Product Manual

Page: 2 / 20

2/20
INDEX
SAFE USAGE OF THE PROJECTOR 3
INSTALLING THE PROJECTOR
4
FITTING THE LAMP
4
POWER SUPPLY – MAINS 5
CONTROL CONNECTIONS 5
DMX TERMINATOR
6
SETUP OPTIONS-PROJECTOR CONFIGURATION
6
TO SET THE DMX START ADDRESS 6
STAND-ALONE MODE 8
MASTER/SLAVE MODE
8
OPERATION MENU
9
DMX PROTOCOL 13
LED INDICATION 14
MAINTENANCE
14
KEEPING THE PROJECTOR CLEAN
14
TROUBLESHOOTING 14
TECHNICAL DATA 15
ELECTRICAL DIAGRAM
17
COMPONENT ORDER CODES
18
Please note that as part of our ongoing commitment to continuous product development, specifications are subject to change without
notice. Whilst every care is taken in the preparation of this manual we reserve the right to change specifications in the course of
product improvement. The publishers cannot be held responsible for the accuracy of the information herein, or any consequence
arising from them.
Every unit is tested completely and packed properly by the manufacturer. Please make sure the packing and / or the unit are in good
condition before installation and use. Should there be any damage caused by transportation, consult your dealer and do not use the
unit. Any damage caused by improper use will not be assumed by the manufacturer and / or dealer.
ACCESSORIES
These items are packed together with the projector:
Name Quantity Unit Remark
Waterproof power female plug 1 Pc 3-pin 16A
XLR cable 1 Pc With plug and socket
Safety cord 4 Pcs
Fastfit clamp 4 Pcs
This manual 1 Pc