manualshive.com logo in svg

PR electronics 9106, Manual

Share
Download
PR electronics 9106 Manual Download Page 9

9106 - Product version 9106-002 

7

PR 4501 DISPLAY / PROGRAMMING FRONT

Functionality

The simple and easily understandable menu structure 
and the explanatory help texts guide you effortlessly and 
automatically through the configuration steps, thus making 
the product very easy to use. Functions and configuration 
options are described in the section ”Configuration / 
operating the function keys”.

Application

•  Communications interface for modification of operational parameters in 9106B.
•  When mounted in the process, the display shows process values and device 

status.

Technical characteristics

•  LCD display with 4 lines: 

Line 1 (H=5.57 mm) shows status for each channel (OK or error). 
Line 2 (H=3.33 mm) shows loop current in mA for channel 1 or tag no. 
Line 3 (H=3.33 mm) shows loop current in mA for channel 2 or tag no. 
Line 4 shows communications status.

•  In order to protect the configuration against unauthorised changes, access to 

the menus can be blocked by a password.

Summary of Contents for 9106
























































Reviews:

No comments

Brands by name

Popular brands

Load more brands