Observing and Recording Leaf Gas Exchange
CIRAS-2 Operator's Manual Version 2.04
- 62 -
records are assumed to relate to that item. If a Treatment file is not specified, a default set of “plots” are
used during recording.
Recording Mode
Defaults to „Current Data‟ in order for
Setup
– Settings
to apply changes.
The following applies to all recording options:
The
Select data file
dialog box (as above) will appear for you to name the data file. In the
Select
Recording Options
dialog you can choose from three file saving options
– „Append to Data File‟;
„Overwrite Data File‟; „Always prompt for new Data File‟. After naming the file you can either accept the
default file location on your computer or UI (example below), or choose a different location. Click
Yes
to
proceed to Recording Mode.
Please note:
If CIRAS-2 is actively performing a
Zero
or
Diff Bal
, you may receive the following message
prior to naming the data file:
