CIRAS RCS Menu Bar
CIRAS-2 Operator's Manual Version 2.04
- 35 -
Stored Diff Bal
This function allows the user to preset and store differential balance values which can be extremely helpful
when performing response curves measurements. Refer to
Calibration
Used to perform a full CO
2
or H
2
O calibration on CIRAS-2. Refer to
details.
Calibration Check
Used to verify the current CIRAS-2 CO
2
and H
2
O calibration settings. Refer to
on page
145 for details.
Calibration Reset
Resets the CIRAS-2 calibration to the Factory Default. Refer to
CO2 Midpoint
Refer to
on page 147 for further details.
Please note that CIRAS-2 Firmware (EPROM) Version 1.67 or greater is required for this function.
If unsure of firmware version, see View
– Quick Info in the CIRAS menu bar.
