Section V Control panel and operation
14
5-1-1.
startup state: when the indication ready light display 5200 or
,then softstater can start. The displaying 5200 means POWTRAN
5200 series softstarter. And
means ready to start.
5-1-2.
Delay state: ready or error state indication light flash means interval, display
dE××× and count down means startup delay.
5-1-3.
Start and stop key:in the process of soft startup,the screen display ×××× to
indicates motor current, and only Stop key is valid, and can not enter menu
to set parameter, and ready,running,error lights black out.In the process of soft
stop, the screen display×××× to indicates motor current,and only RUN key is
valid, and can not enter menu to set parameter, and ready, running, error lights
black out, meanwhile the stop key has reset function.
5-1-4.
PRG key , in the non-help mode, press the PRG key to enter the setup
menu,display PX: XXX,then press PRG key again, colon flashes, that means
can modify the parameters after colon.Press the Set key when the colon
flashes, if the data has been modified, it will display good and twice ring,
indicating that new data has been saved, and then exit. If you do not want to
save the new data, press the PRG key, colon will stop flashing and restoring
the original data, then press Set key or Stop key to exit.
5-1-5.
Set key, in the non-setting state, press the set key to enter the help menu,
display HX: XXX, press the Set key or stop key to exit. In setting state, press
the set key to save the new setting of data and to exit the setting state.
5-1-6.
Acceleration,deceleration key, in the setting menu, when the colon does not
flash ,press the acceleration or deceleration key to change the function number;
when colon flashes, press the acceleration or deceleration key to change the
data, press on the acceleration or deceleration key for more than 1 second, the
data will be increased or decreased continuously and quickly .In the help
menu, press the acceleration or deceleration key to change the function
number and the corresponding message.When the indicator light of bypass
operation is on, and did not enter the setting and help menu, display AXXXX,
that means the motor running current, then press the acceleration or
deceleration key to select display PXXXX or HXXXX.PXXXX indicates
motor apparent power;HXXXX indicates motor overloaded heat balance
coefficient. When indication value of HXXXX is more than 100%,soft starter
will be overload protection and display Err08.
5-1-7.
When the data is more than 999, the last decimal point is bright, indicates the
ma 0.
5-1-8.
If the key operating is effective,there will be a voice tip, or this key does not
work in this state.
5-1-9.
When the external control terminal connected to a 3-wire mode, the external
control start button and stop button have the equivalent function with start and
stop keys on the control panel.
5-1-10.
The control panel with super anti-jamming design,and the outside connection
