TC308 Instruction Manual
Powtier Controls Limited
DESCRIPTION
The TC308 is housed in a durable sheet metal and
flame retardent plastic housing. The seven segment
LED display monitors measured value continuously
and the error bar indicator shows the proximity to
setpoint.
Setpoint can be displayed by depressing the setpoint
changeover switch on the front panel. The setpoint,
proportional band and manual reset controls are
located at the front and concealed behind a snap-
shut door to minimise any accidental re-setting.
Setpoint adjustment is made by turning the setpoint
thumbwheel.
Dimensions
INSTALLATION
The instrument requires a 92X92mm panel cut out
and is fixed by retainers positioned on the top and
bottom of the instrument. Maximum panel thickness
is 10mm.
All external wiring is made to the rear of the
instrument via M3 screw terminals.
Wiring diagram.
22 November 1994
- 2 -
308IM
Issue 2.0
