e
Use this button to enter data and move from a main screen to
a sub-menu.
Holding down for 5 secs. will display the run log.
Programming keypad (5 Buttons)
User keypad (4 Buttons)
Use these two buttons to
move up and down
between screens.
Use these two buttons to
increase/decrease the value.
Use these two buttons to
increase/decrease the
selected value
Use these two buttons to move
along the screen.
Default password set to
Menu Layout
Switches Eurotrol ON or OFF
Adjusts day temperature
Adjusts frost temperature
Set program times
Set holiday dates
Set current time and date
Set new main menu password
Default password set to
Set Basic or Advanced
Set temperature differential
Adjusts night temperature
Main display
14
7
A short press of either button will place the control into that respective
mode until midnight of that day. (Indicated by a flashing H for heating
or F for fan only,in the display)
Pressing either button for 5 secs. will permanently place the control
into that respective mode. (Indicated by a steady H for heating or F
for fan only, in the display)
Resets the burner from lockout, (when this facility is available), and
resets the run log to zero when used in the main menu.
Pressing once will activate the soft override (will change the programs
On or Off state until the next program step). Holding down for 5 secs
will initiate or cancel the extension time. . Used as the escape key in
the programming menus.
Heating
Fan Only
Reset
Override
e
e
e
e
e
e
e
e
e
e
e
Summary of Contents for Eurotrol 2
Page 2: ...2 19 Notes ...
