background image

5

SAVE THESE INSTRUCTIONS

READ AND UNDERSTAND ALL INSTRUCTIONS BEFORE USING THIS UNIT

Read and understand this owner’s manual and all labels on the unit before operating. Safety is a 
combination of common sense,staying alert, and knowing how your unit works. Use this unit only 
as described in this manual. Use only manufacturer’s recommended attachments. To reduce the 
risk of personal injury or damage to your unit use only recommended accessories.

WARNING 

To avoid fire, DO NOT use with a flammable or combustible liquid or floor cleaner.

WARNING 

To avoid electric shock, DO NOT expose to rain. Store Indoors.

When using this extractor, basic precautions should always be followed, including the 
following:

1) DO NOT leave unit when plugged in. Unplug from outlet when not in use and before servicing.
2) DO NOT allow unit to be used as a toy. Close attention is necessary when used around or near 
children.
3) Use only as described in this manual. Use only manufacturer’s recommended attachments.
4) DO NOT use with damaged cord or plug. If unit is not working properly because it has been 
dropped, dropped into water, left outdoors, or damaged in any way, contact a service center
5) DO NOT handle plug or appliance with wet hands.
6) DO NOT put any objects into openings. 
DO NOT use with any opening blocked: keep free of dust, lint, hair, or anything that may
reduce air flow.
7) Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.
8) DO NOT pick up anything that is smoking or burning such as cigarettes, matches, or hot ashes.
9) DO NOT use to pick up hazardous chemicals.
10) Turn off all controls before unplugging.
11) Turn unit off immediately if foam or liquid comes from machine exhaust. Empty & clean out 
recovery (dirty) tank and use defoamer to correct the problem.
12) DO NOT use to pick up flammable or combustible liquids such as gasoline or use in areas 
where they may be present.
13) DO NOT use where oxygen or anesthetics are used.
14) Replace damaged or worn parts immediately with genuine original equipment parts to 
maintain safety.
15) This unit must be connected to a properly grounded outlet only.  See grounding instructions. 
16) DO NOT use equipment out of doors or in the rain.
17) DO NOT use equipment near or around flammable or explosive materials, fuels, or solvents.

18) DO NOT allow the unit to freeze.
19) Anyone designated to operate this equipment must, without fail, read and thoroughly 
understand all instructions and precautions prior to use.
20) Never lift the machine by pressure regulator (on heated model).

21) Wear safety equipment and clothing to protect from extremely hot water.

22) Do not operate in standing water.

23) Do not operate equipment under any unsafe condition.

IMPORTANT SAFETY INSTRUCTIONS

Summary of Contents for PE060-G15-U













Reviews: