background image

PAS26R CROSSOVER AUTOMATIC SCRUBBER

25

Maintenance Action

Daily

Every 50 Hours Every 200 Hours

Check the battery water level when charged; if necessary, add distilled water 

(only for version with lead acid battery). Gel batteries are maintenance-free.

x

Check seal of recovery tank cover.

x

Visually check integrity (damage or wear) of the tires.

x

Ensure the brushes are correctly mounted.

x

Check connections of flexible vacuum hoses.

x

Check correct operation of brakes and steering wheel.

x

Inspect the vacuum filter for any debris.

x

Clean the detergent solution filter and tank. Check flow.

x

Clean brushes and check them for wear.

x

Clean squeegee rubbers and check them for wear. It is recommended to turn 

them every 20 working hours.

x

Clean the recovery tank and vacuum filter.

x

Clean the outer part of the tank. Check integrity.

x

Charge batteries.

x

Clean the top of batteries.

x

Clean detergent solution filters.

x

Check effectiveness of parking brake.

x

Check all motors to ensure the carbon brushes are not worn.

x

1.  Unloading from pallet: always use a ramp to move the machine.
2.  On loading or unloading from truck: lift the head, always remove brushes, squeegee and splash 

guard. Rest the the hose of the squeegee on the support bracket.

3.  End cleaning: always lift the head.
4.  End cleaning: it is recommended to always turn off the switches of brushes and vacuum motor 

before turning the key.

5.  End cleaning: always clean the recovery tank/dirty water.
6.  End cleaning: always clean the drying blades.
7.  Squeegee lever: you must operate only in the case of washing without drying. In all other situations, 

never use it.

8.  Squeegee blades: it is recommended to turn them when necessary, bearing in mind that there are 4 

useful positions.

9.  Brushes: check for wear and replace them when required and at least once a year.
10.  Stainless steel air intake filter: inspect it regularly and clean when dirty (dry suction).
11.  Water filter: inspect it and wash it regularly.
12.  Batteries: charge them for at least 8 hours.

      15.10.  MAINTENANCE SCHEDULE

      15.11.  SUMMARY FOR GOOD MAINTENANCE OF THE MACHINE

https://harrissupplyind.com - To Order Parts Call 608-268-8080

Summary of Contents for PAS26R





























Reviews: