PAS26R CROSSOVER AUTOMATIC SCRUBBER
23
This is done as follows:
1. With the brush plate lifted, turn the ignition key to OFF; the parking brake is
engaged.
2. Press on the top of the brush to remove it from its rim hub and let it drop on
the floor.
3. To insert the new brush, place it under the brush plate, roughly aligned with
the hub, then lift it with your hands and push it against the hub until it engages
the closing tabs (you should hear several snaps).
In order to avoid brush or pad warping in case of no use, it is recommended to
always lift the brush deck when the machine is idle.
The machine is packed, shipped and delivered with the squeegee
assembly.
We recommend that you mount the squeegee providing its rotation
to the right, to have the most amount of clear hose that facilitates
assembly.
To do this, turn the mounting arm to the right, move the squeegee
closer and fix it with the suitable screws. Connect the hose to the
squeegee connection itself.
Two squeegee adjustments are possible:
1. Longitudinal tilt: the squeegee may be tilted more forward or
backward by tightening or loosening the threaded adjusting screw.
2. Height from ground: using the clamping nut of the support wheel
to move vertically the wheel itself, by screwing or unscrewing it
from its mounting plate.
The ride height adjustment and tilt are needed when you work on
different floors.
It is recommended to lower the squeegee evenly, raising or
lowering both wheels to the same value.
15.6. SQUEEGEE ADJUSTMENT
15.5. SQUEEGEE ASSEMBLY
15.4. BRUSH REPLACEMENT
https://harrissupplyind.com - To Order Parts Call 608-268-8080
