PAS26R CROSSOVER AUTOMATIC SCRUBBER
20
14.4.3. SQUEEGEE LIFT LEVER
The brush plate is built into the squeegee and it lifts jointly with the brush plate.
The squeegee may also be lifted independently by means of the manual lever located to the left of the steering column.
Turn the hand lever clockwise to place squeegee in the UP position.
To return squeegee to DOWN position, turn the hand lever to the opposite direction until it is on the DOWN symbol.
The use of this lever is indicated only in case of double cleaning processing. See below:
14.4.4. STEERING WHEEL
It is used to turn the front wheel to change the direction of travel of the machine.
14.5.1. MOTOR FUSE PLATE
It is located to the right of the steering column.
14.5.1. PLATE OF CIRCUIT BREAKERS
It is located to the right of the steering column.
There are buttons to release the circuit breakers of the motors,
which trigger following overheating as a result of an increase in
electricity consumption.
The picture to the right shows the functions that are protected by
these devices.
Position 1 = brush lifting motor thermal protection (5 Ampere)
Position 2 = brush rotation motor thermal protection (30 Ampere)
Position 3 = extraction motor thermal protection (30 Ampere)
Position 4 = main thermal protection (5 Ampere)
1
2
4
3
14.5. ELECTRICAL CONTROL DEVICES
https://harrissupplyind.com - To Order Parts Call 608-268-8080
