PAS26R CROSSOVER AUTOMATIC SCRUBBER
13
11. INSTALLATION
Before use, perform the following operations:
1. Perform a preliminary inspection to identify any problems that might cause malfunctioning or
breakdowns. Visually ensure there is no external damage, leaks and the wheels are not damaged.
3. Ensure the squeegee is correctly adjusted.
4. Check that the drain hose, the cap and the hose from the squeegee are installed properly, taking care
to insert the hose into a sharp bend with a suitable curve as shown in figure above.
5. Check battery conditions and if necessary recharge.
6. Ensure the brakes and steering wheel operate correctly.
Should any damage, fault or missing parts be detected, do not commission the machine and contact your
Dealer or Powr-Flite.
The machine is shipped on a pallet.
Unload the machine from the pallet. It is recommended not to push the machine from the pallet without the use of a
ramp. It is recommended to remove the batteries (if installed) and unload it by hand.
11.1 Preliminary operations
https://harrissupplyind.com - To Order Parts Call 608-268-8080
