Powertronix spa reserves the right to modify this document without notice
Page 25 of 46
R&D – USER MANUAL DT0430-E04
3
CONTROL PANEL
3.1. INTRODUCTION
The control panel is located on the upper front part of the UPS, and it’s used for easily check the general
status of the UPS and batteries and related alarms.
The panel contains an LCD screen (which indicates the operating status, measurements and alarms of the
UPS) and the red EPO button located at the left of the display.
The display panel shows text messages and operating parameters on an LCD screen with 4 lines and 20
characters per line.
The screens are organized in 6 multi-level menus, which can be selected using the membrane buttons under
the LCD display.
Two LEDs are present on the left side of the display, a green one called “NORMAL” and a red one called
“ALARM”.
The actions of the LED are summarized in table 3.1a.
Figure 3.1a
