-4-
2. Explosive Gas Precautions
This equipment contains components that can produce electrical arcs or sparks. To prevent fire or explosion do not
install in compartments containing batteries or flammable materials, or in locations that require ignition-protected
equipment. This includes any space containing gasoline-powered machinery, fuel tanks, or joints, fittings, or other
connections between components of the fuel system.
3. Precautions When Working With Lead-Acid Batteries
If battery acid contacts skin or clothing, wash immediately with soap and water. If acid gets into eyes, immediately
flood eyes with running cold water for at least 20 minutes and get medical attention immediately.
•
NEVER
smoke or allow a spark or flame in vicinity of batteries or an engine. Do not drop a metal tool on the
battery. The resulting spark or short-circuit of the battery may c a u s e a n explosion.
•
Remove personal metal items such as rings, bracelets, necklaces, and watches when working with a
lead-acid battery. A lead-acid battery can produce short-circuit currents high enough to weld a ring or
similar metal, causing a severe burn.
4. Installation and Operation
To get the most out of the Power Inverter, it must be installed and used properly.
E. Front View & Main Functions
1. Power ‘ON/OFF’ Switch
Make sure the Power Switch is in the ‘OFF’ position during installation.
2. LED Indicators
Over Volt:
Over Voltage Protection.
Over Temp:
Over Temperature Protection.
Under Volt:
Under Voltage Protection.
Over Load:
Over Load Protection.
Power:
Power ON.
Run/Green Power:
Indicates current operating condition of the inverter.
F. Rear View & Main Functions
1200L
