-3-
A. Introduction
We are experts in DC to AC Power Inverter design and manufacture. Our engineers use advanced technological
design that results in an inverter that is excellent, smarter and easier to use than any other inverter with similar power
ratings. Our inverters have been engineered to provide you with years of trouble free operation. The inverters provide
a Pure Sine Wave output with very high quality power, usually with less spikes and surges than grid-supplied power.
Please read the entire User Manual carefully before commencing installation.
B. Application
The
MI-5180 Pure Sine Wave Power Inverter
will
provide 1200 watts of Pure Sine Wave AC power from a 12VDC
source.
C. Features
Capable of driving inductive loads i.e. electric
tools and appliances
Microprocessor-based design with accurate and
stable frequency
Minimal effect on equipment like TV, radio…etc
Standard adjustable output 240Vac, 50Hz
Standard specially-designed AC and DC line
filters
Standard input 12V
Specific chassis for harsh environments
Very low harmonic distortion, THD<3%
No problem with microwave ovens (power
dependent)
Very efficient stand-by circuit
Standard low battery sensing and cut-off
Quick
response, stand-by functions
Overload sensing
Can be used anywhere
State-of-Art auto load sense
Simplified system design
Pure sine wave at 50Hz
Remote control unit
Lowest installation cost
Green Power function
Extremely efficient
Reliable
Easily mounted
No noise
D. Safety Instructions
1. General Safety Instructions
•
Do not expose the Inverter to high levels of moisture, rain, snow, spray, bilge, dust, sources of heat or sunlight.
•
To reduce risk of hazard, do not cover or obstruct the ventilation openings. The Inverter uses exhaust fans for
forced ventilation which will operate when the inverter reaches a certain temperature.
•
Do not install the Inverter in a zero-clearance compartment. Overheating may result.
•
To avoid a risk of fire and electronic shock, make sure the installed wiring and terminations are in good electrical
condition and that all cables are not undersized.
•
Do not operate the Inverter with damaged or substandard wiring.
•
Keep the Inverter in a secure and safe place, out of the reach of children.
•
Check the ‘ON/OFF’ switch is in the ‘OFF’ position before installation.
•
To prevent electric shock, do not remove the cover. Dangerous voltages exist inside the unit even after it has been
switched ‘OFF’. If a fuse blows, or protective device fails, parts of the Inverter still remain functional. There are no
user serviceable parts inside. Only qualified personnel should carry out maintenance or service the device.
WARNING!
Before installing and using your inverter, please read the General Safety
Instructions!
