46
The Unit and its Serial Number should appear within 5 seconds
Drag and drop the unit into the Workshop, notice the ‘white/red
square around the unit, this happens while Armonia is discovering
with the unit
Click on the “Arrow” and Double Click on the Amplifier
Click on the Matrix Area
Once the Discovery Phase is complete (10 seconds) the square
will turn Green. Double click on the Unit to continue the test
By hover the mouse cursor on top of the unit’s icon, it is possible
to check the Model, Serial, Retel(IP Address), Firmware
7
9
10
8
11
12
Apply a 1KHz 1Vpp audio signal to CH1
Check for presence of the signal in all the other channel’s VMeters
14
15
Function
Generator
Input 1
Connect a Function Generator tot Input 1 on the LINE connector
as portrayed.
Signal: 1KHz 1Vpp Sine
Apply a 1KHz 1Vpp audio signal to CH1
Check for presence of output signal in all channels.
Peak Current: 43.46 +/- 5%
RMS Current: 30.46 +/- 5%
16
Select: ALL INPUTS ON CH1
13
QUATTROCANALI | SERVICE MANUAL
Summary of Contents for Duecanali 1604
Page 2: ...Intentionally left blank ...
Page 67: ...Intentionally left blank ...
