PowerShot PRO 9100, Instruction Manual

Page: 2 / 28

WARNING! Read and understand all instructions. Failure to
follow all instructions listed below may result in electric shock, fire, and /
or serious injury. When using electric tools, basic safety precautions
should always be followed to reduce the risk of fire, electrical shock and
personal injury. Read the following rules for safe operation before use.
SAVE THESE INSTRUCTIONS
READ ALL SAFETY INSTRUCTIONS BEFORE USE!
1.
WORK AREA:
Keep your work area clean and well lit.
Cluttered benches
and dark areas invite accidents.
Do not operate power tools in explosive
atmospheres, such as in the presence of flammable liquids, gases, or dust.
Power Tools create sparks which may ignite the dust or fumes
. Keep bystanders,
children, and visitors away while operating a power tool.
Distractions can
cause you to lose control.
2.
ELECTRICAL SAFETY
: Double insulated tools are equipped with a
polarized plug (one blade is wider than the other.) This plug will fit in a
polarized outlet only one way. If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit, contact a qualified electrician to
install a polarized outlet. Do not change the plug in any way.
Double
insulation eliminates the need for the three wire grounded power cord and grounded
power supply system.
Avoid body contact with grounded surfaces such as pipes, radiators,
ranges, and refrigerators.
There is an increased risk of electrical shock if your body
is grounded.
Do not expose power tools to rain or wet conditions.
Water entering a power
tool will increase the risk of electrical shock.
Do not abuse the cord. Never use the cord to carry the tools or pull the
plug from an outlet. Keep cord away from heat, oil, sharp edges, or
moving parts. Replace damaged cords immediately.
Damaged cords increase
the risk of electric shock. When operating a power tool outside, use an outdoor
extension cord marked "W-A" or "W". These cords are rated for outdoor use and
reduce the risk of electric shock.
GENERAL SAFETY RULES
1