30 Cordless Framing Nailer
Cleaning Procedure
Tool
Cordless Tool Cleaner/Degreaser
Paslode Cordless Lubricating Oil
(USA and Canada)Part No. 401482
(USA)Part No. 219348
Part No. 401331
5/32" Hex Key Wrench
905624-1
09/15
This procedure provides a simple but effective way to
clean your Paslode Cordless Framing Nailer and main-
tain reliable operation. Regular cleaning and lubrication
will also extend part life and provide maximum nail
driving power.
Only
one
tool
is
necessary
to
disassemble the
Paslode
Cordless
Framing
Nailer
in
preparation
for
cleaning:
the
5/32"
hex
key
wrench
provided
with
the
Paslode
Cord-
less Framing Nailer.
Paslode
recommends
that
an aerosol
"Cleaner/Degreaser”
or
Paslode
®
Cordless
Tool
Cleaner
(Part No. 219348),
(Canada use Part No. 219086) (Australia, New Zealand
use Part No. B20544L)
This
cleaner
is
available through your local Paslode Dealer.
If a different type of cleaner is selected, make sure that
it will not damage plastic, rubber or electronic compo-
nents. Chemical damage to these materials or compo-
nents may result in the tool being made inoperable.
Although "safety" cleaners generally provide reduced
risk of fire and are more stable than other cleaners, they
cannot be handled carelessly. Always follow the manu-
facturer's instructions and never spray cleaner on the
Paslode Cordless Framing Nailer, unless the tool has
been allowed to cool down.
To begin, you will need the following items:
(Canada) Part No. 219086
be used for cleaning.
(ANZ)Part No. B20544F
(ANZ) Part No. B20544L
