7
Motor Assembly
Step 7
Tilt the
Motor Assembly
upright, and apply 3-4
drops of
Paslode Cordless Lubricating Oil
evenly
spaced around the top of the
Combustion Chamber
(Area "C"). Spread the oil using your fingertip.
Step 8
Reassemble the
Paslode Cordless Framing Nailer
following disassembly Steps 1-3, page 2 in
Reverse
order.
DANGER
Do not attempt to operate the tool unless the head
screws, filter and cap are securely attached to the
housing. Operating the Paslode Cordless Framing
nailer with loose or missing head screws can result
in the escape of burning gases, tool damage, and
injury to tool user and property.
Combustion
Chamber
Sleeve
Piston
Assembly
"Mid-Check"
Area
C
B
B
A
NOTE:
After the tool is completely
assembled and all screws are tightened,
test the tool for proper operation. Some
smoke may be noticeable from the
exhaust ports on the first few cycles as
excess oil is burned off. Consult the
Operating Manual for instructions if the
tool malfunctions.