Rev: 1.1
Page 12 of 13
3 Error Messages
In some instances, error messages may display if a problem occurs. If the user encounters one
or more of these error messages, please check the setup again.
Examples:
The service type selected is not compatible with
the MTA15Z. Go back to the Site Editor (Main
Menu, Select Site) and select a service type file
that ends with “M”.
The PowerMaster
®
cannot communicate with the
MTA15Z. Verify the following:
1. Verify cables are connected according to
Section 1 Setting Up, Communication and
Power Connections
2. Verify 24VDC output from gray power
cable connected to AUX ANALOG on the
PowerMaster
®
If the error continues, please contact Powermetrix
Technical Support.
The PowerMaster
®
cannot detect an auxiliary
power source between 100-530VAC. Check the
connections and/or verify the Auxiliary Power
switch is in the “on” position (- = on).
