PROCEDURE:
Tools required: Phillips screwdriver, water pump pliers, 1/4"slot screw driver.
1. Remove Handle Housing Covers(2) by removing the 10-24NC Screws(2 each).
2. Remove the Button Caps using water pump pliers.
3. Pull the Push Button Switches down and out of the Handle Housing.
4. Remove the screws retaining the wiring to the Push Button Switches using the
1/4"screwdriver.
5. Re-attach the wiring to the replacement Push Button Switches.
6. Re-insert the Push Button Switches into the Handle Housing.
7. Screw on the Button Caps and tighten with the water pump pliers.
8.
Install the Handle Housing Covers with the 10-24NC Screw.
PUSH BUTTON REPLACEMENT L-SERIES
PowerMate
®
Operation Manual
Typ.2
-Typ.2
PN 050210
PN 011630 Rev.F
Eng. 12/ 09/ 20
5.07
10-24NC Screws
Handle Housing Cover
Push Button Switch
Handle removed
for clarity.
Handle Housing
Button Cap
