PowerMate
®
Operation Manual
MAINTENANCE AFTER EVERY YEAR OF OPERATION
continued
WARNING
- All repairs, electrical or mechanical, should be carried out only by a
trained and competent service person. Use only approved repair
parts; any others may create a hazard.
12. Reassemble the drivescrew assembly and electric motor in the equipment as outlined
elsewhere in this manual.
13. Replace the 2 rubber grips on the heelplate of the outer frame.
14. Remove the control handle assembly and replace the two pushbuttons.
15. Check that all electrical wire connections are secure.
16. Check that the battery and battery charger are in good condition and that the battery
is fully charged.
17.
Repeat the equipment load test from step #1. Cycle the equipment up and down
several times in order to evaluate its condition.
PN 011680 Rev.E
Eng. 04/ 25/ 14
5.02
