PH4000Ri/E Owner’s Manual
21
6.8. Digital display
This generator is equipped with an LCD digital display that provides continuously-updated status information for the
following parameters:
•
(U) Voltage—Current voltage supplied
•
(I) Amperage for the generator output
•
(P) Wattage (power) output for the generator
•
(T) Run time—Total generator run time since first start (in hours)
•
(FUEL) Fuel level (bar reading)
•
The digital display will not illuminate unless the generator is started.
•
It is normal for the run time indicator to have 1-2 hours on the meter from the factory for testing and
quality assurance inspections.
The digital display will illuminate within a few seconds of the generator starting, and will initially display data from the last
run of the generator. Within a few seconds of illumination, the display will begin to show new data, and at that point the
generator is ready to supply power.
NOTE
!
IIIII
FUEL
U: 000.0 V
P: 0000 W
T: 000.0 H
I: 00.0 A
Data fields
Fault code button
Low Oil indicator (red)
P: 0261
Example fault code
