Display:
Brightness
-Display Brightness level.
Auto -automatic brightness by light sensor.
Аuto2 -same with less light to brightness response.
0...10 -static value.
OFF Threshold -illumination level (conventional units) at which display turns on in auto mode.
This setting also controls turn on by brightness function.
0...18 -more value needs more illumination to turn on display.
Auto level
-Auto brightness sensitivity.
0...14 -less value, less brightness with same illumination.
Style
-Indication style of voltage on Display.
<Retro>
-Retro font.
<Digt.>
-Digital font.
<Dots>
-Dots font.
<Arrow>
-Analog arrow meter without background.
<Arrow2>
-Analog arrow meter with color background.
<Oscil.1>
-Oscilloscope meter without background.
<Oscil.2>
-Oscilloscope meter without background.
<Demo>
-Demo mode for shop. Auto style change.
Indication
-Amount of display information.
OFF -Display turned off.
Min -Voltage only
Full
-All available information.
Color
-Indication color.
Bg. color
-Color of sensor buttons in off function state.
OFF brightness -Brightness in case the Sequencer is in the ‘off’ state.
0...4 static value.
<Dots> - Display is off. only buttons is lighted.
3%...100% reduction in percent from sequencer on state.
Key lock:
To lock the touch sensors while in the main menu, hold the sequencer (2) button until you see the ‘lock’
message. If you want to keep the lock after power on/off, select ‘save’ option. To unlock repeat the lock
sequence.
