Proprietary & Confidential
Page 13 of 73
5.
Connect your add-a-fuse kit to the vehicle fuse slot you chose.
6.
Connect the ground wire by slipping it under a metal bolt or screwing it into your vehicle. If
needed, use a socket wrench set to loosen the bolt.
Note
A loose ground wire can result in power issues for your dashcam. We recommend grounding your wire
to an unpainted bare metal bolt.
7.
Connect the power cable to the dashcam.
Important
Once you have hardwired the power source, the camera starts up automatically every time you turn on
the vehicle.
8.
Start your vehicle to test the dashcam.
Note
When a dashcam is in storage, the battery gets completely drained. Before using the dashcam, you need
to charge it for an extended period, using at least a 2A power source, before the dashcam turns on.
9.
Once you have tested your dashcam, run the power cable along the headliner of the vehicle
from the A-Pillar to the power source.
See also
•
What is in the box?
•
Insert the SIM and SD cards into the dashcam
•
Connect the dashcam to a power source
•
Connect the dashcam to an OBD2 port for power
•
Set the dashcam viewing angles
Summary of Contents for V-AI12
Page 7: ...Proprietary Confidential support powerfleet com Page 7 of 73 Calibrate the dashcam sensors...
Page 14: ...Proprietary Confidential support powerfleet com Page 14 of 73 Calibrate the dashcam sensors...
Page 59: ...Proprietary Confidential support powerfleet com Page 59 of 73...
Page 61: ...Proprietary Confidential support powerfleet com Page 61 of 73...
