15 lb. Portable Soda Blaster
Visit www.princessauto.com for more information
3
8549099
V 4.1
important Safety precautionS
WARNING! Read and understand all instructions before using this tool. The operator must follow
basic precautions to reduce the risk of personal injury and / or damage to the equipment. Before
allowing someone else to use this tool, make sure they are aware of all safety information.
WARNING! The warnings, cautions and instructions discussed in this instruction manual cannot
cover all possible conditions and situations that may occur. Common sense and caution are factors
that cannot be built into this product, but must be supplied by the operator.
NOTE:
Keep this manual for the safety warnings, precautions and operating, inspection and
maintenance instructions. When this manual refers to a part number, it refers to the included parts list.
Work AreA
1. Operate in a safe work environment. Keep your work area clean and well lit.
2. Use this product only in a clean working area.
3. Do not use in the presence of flammable gases or liquids.
4. Keep anyone not wearing the appropriate safety equipment away from the work area.
NOTE:
Minimize distractions in the work environment. Distractions can cause you to lose
control of the tool.
5. Store tools properly in a safe and dry location to prevent rust or damage.
6. Always lock up tools and keep them out of the reach of children.
PersonAl sAfety
CAUTION! Wear protective equipment approved by the Canadian Standards Association (CSA) or
American National Standards Institute (ANSI) when using the tool.
1. Dress properly; wear protective equipment. Use breathing, ear, eye, face, foot, hand and head
protection. Always wear ANSI approved impact safety goggles, which must provide both
frontal and side protection. Protect your hands with suitable gloves. Wear a full face shield
if your work creates metal filings or wood chips or dust particles. Protect your head from
falling objects by wearing a hard hat. Wear an ANSI approved dust mask or respirator when
working around metal, wood and chemical dusts and mists. Wear ANSI approved earplugs.
Protective, electrically non-conductive clothes and non-skid footwear are recommended
when working. Wear steel-toed boots to prevent injury from falling objects.
2. Control the tool, personal movement and the work environment to avoid personal injury or
damage to the tool. Stay alert, watch what you are doing and use your common sense.
a. Keep articles of clothing, jewelry, hair, etc., away from moving parts to avoid
entanglement with a tool.
b. Do not operate any machine / tool when tired or under the influence of drugs, alcohol
or medications.
c. Do not overreach when operating a tool. Proper footing and balance enables better
control of a tool in unexpected situations.
d. Use clamps or other practical ways to support or secure the work piece to a stable
platform. Holding the work piece by hand or against your body is not stable and may
lead to loss of control and injury.