Plugs NOT INCLUDED with generator.
Outlets may be marked with rating value greater than generator
capacity.
Never attempt to power a device requiring more amperage
than generator or extension cord can supply. Do not overload genera-
tor because of risk of damage to equipment, fire or explosion.
Generators vibrate in normal use.
During and after the use of the generator,
inspect the generator as well as extension cords and power supply cords con-
nected to it for damage resulting from vibration.
Have damaged items repaired or replaced as necessary. Do not use plugs or
cords that show signs of damage such as broken or cracked insulation or dam-
aged blades.
240V AC, 15A S223E-1 OUTLET:
Use this outlet to operate 240V AC, 50 Hz, single
phase loads requiring up to 15A each outlet.
The outlet is protected by press-to-reset circuit
protector. If the protector pops up due to appliance
overload, remove the loads and wait a minute for
the protector to cool down and then press to
reset.
Use only high quality, well-insulated, grounded
extension cords that are intended for outdoor use.
It is important to inspect all extension cords for
damaged plugs and cracked or cut insulation
before every use.
CONNECTING TO GENERATOR OUTLETS
In order to prevent damage and prolong the life of the generator and any attached
appliances or tools, it is very important to use caution when adding loads to the
generator. Use the following steps as a guide to protect the generator and provide
safety for those who use it.
1. With nothing connected to generator, start engine by following steps outlined in
this manual.
2. Plug in and turn on first load. This should be the largest load.
AC 24
0V/50
Hz
A
2
1
PUSH
ON
P R O T
E C T O
R
22