www.powerbox-systems.com
13
•
Input
The transmitter channels are assigned to the iGyro or sequencer here.
•
General
This menu is used to alter fundamental settings such as the language or frame
rate.
•
Assistent
Always
use the Setup Assistant when you are preparing a new model for its first
flight. This is where the transmitter input channels are determined, the model
type selected, and the servos assigned to the outputs. In just a few minutes the
primary functions can be ready for use, and the Assistant procedure makes it
much easier to set up the gyro functions at a later stage.
5. GENERAL SETTINGS
Before you start using the primary functions (with the help of the Setup
Assistant) and connect the servos, you should enter the basic settings
in the
General Settings
menu.
•
Radio control system
This menu point cannot be selected manually. As already mentioned, the unit au
-
tomatically detects the radio control system. If you have already connected your
receivers and bound them to the transmitter, you will see at this point the radio
control system it has detected.
