PowerBoss SW5X, Instruction Manual

Page: 25 / 112

Lift side brush and cylinder
broom before removal of
the dirt hopper.
Riding with the lifted hop-
per reduces stability of the
machine significantly. For
this reason, do not lift the
hopper but just before emp-
tying. Before lifting the hop-
per, the operator has to ma-
ke sure that no persons or
objects are behind or next
to the machine. Stop the
machine on level ground
before lifting the hopper.
When the hopper is lifted,
the operator has to ride the
machine slowly.
Keep clear of the hazard
zone!
Pinching and shearing ha-
zard. Provide for required
safe distance before lifting
or lowering the dirt hopper.
Control panel (Lift-Up Disposal)
1 Release switch for lifted-up dispo-
sal function
2 Dirt hopper, lift and lower
Proceed to emptying of the dirt
hopper as follows:
- Lift and switch off side brush and
cylinder broom
- Proceed to shaking of the filter
system
- Actuate switch (Fig. 10/1) and hold
(dirt hopper is released)
- Actuate switch (Fig. 10/2) by
pushing = lift dirt hopper
- Dirt hopper (Fig. 9/3) is lifted-out
- Back the SW5X until the dirt hop-
per is positioned above the contai-
ner for disposal.
- Pull the safety knob (Fig. 11/1) of
the release lever (Fig. 11/2).
- Release swinging of the dirt hop-
per by release lever (Fig. 11/2).
- Forward the SW5X after emptying.
- Lower dirt hopper by actuating
switch (Fig. 10/1) and switch (Fig.
10/2); pull lever = lower dirt hopper
Operation
Fig.10
25