5.8 Cylindrical Brush Deck
1 Brush deck pedalt 2 Dirt
hopper 3 Cylindrical brush
deck 4 Roller bumpers 5
Quick-release 6 Feed inlet 7
Brush seating 8 Locking lever
Fig.11
5.8.1 Clean dirt hopper
Clean dirt hopper (Fig. 11/2) at daily in-
tervals or as required. Remove dirt hopper
from the right machine side (seen in
direction of travel). Use quick-release (Fig.
11/5) to loosen feed inlet (Fig. 11/6) and
clean dirt hopper.
5.8.2 Remove brushes
1. Lift up cylindrical brush deck (Fig. 11/3) by
pedal (Fig. 11/1).
2. Release brush seating (Fig. 11/7) by locking
lever (Fig. 11/8).
3. Remove brush seating by lowering and
removing it to the front.
4. Remove and check the brushes.
5.8.3 Clean brushes
Clean brushes in the brush deck at daily
intervals or as required.
5.8.4 Fit brushes
Check brushes in the brush deck for
wearing at weekly intervals and replace as
required.
1. Insert brush into brush deck and let it catch
(teeth
A
have to point to the outside).
2. Place brush seating and lock by lever.
5.8.5 Change roller bumper
Check roller bumpers (Fig. 11/4) at weekly
intervals and replace if required.
